0800 954 8862
MYHEAT Underfloor Heating Cable Kit
MyHeat Underfloor Heating Kits provide an underfloor heating solution in your kitchen, bathroom or conservatory. The cables are ideal for smaller installations or in rooms with an irregular layout and can be fitted on top of existing wooden or concrete floors that are sound and suitably prepared. The flexibility of the loose cabling system makes it possible to heat the maximum floor area including hard to reach areas.
The cable kit contains:
- Heating cable
- Flexible conduit for floor sensor
- Acrylic floor primer
- Roller to apply the floor primer
- Strong adhesive tape to affix the heating cable to the primed floor
Further Information
Classic heating cables rated 10W/m are ideal for refurbishment
Projects where they can be installed onto an existing floor structure with either a concrete or timber sub-floor.
In floor heating cables can be installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level.
Consequently, there should be no requirement to reduce door heights or raise skirting boards.
The heating cables are also ideal for installation embedded in concrete or a floor screed in new-build project applications.
Our in floor heating cable is a twin conductor design with a single 3 metre long 'cold tail' connections lead (only one connection cable to the thermostat).
Classic cable is supplied together with a 2mtr length of 12mm flexible conduit for the floor sensor (supplied with the thermostat).
Features Include:
- Ultra-thin cable
- Twin conductor ultra flexible cable simplifies installation.
- Single “cold tail” connection lead
- Suitable for use in wet areas
- Low build height – minimal floor height build up
Product Codes
| Heated Floor Area to be Covered (m2) | |||||
| 160W/m2 | 130W/m2 | 100W/m2 | Cable Kit Used | ||
| cable spacing 7.0cm | cable spacing 9.0cm | cable spacing 11.0cm | Product Code | Output (W) | Length (m) |
| 0.4 | 0.5 | 0.6 | MHCKE65 | 65 | 6.6 |
| 0.7 | 1.0 | 1.2 | MHCKE120 | 120 | 11.4 |
| 1.4 | 1.7 | 2.1 | MHCKE200 | 200 | 18.9 |
| 1.7 | 2.2 | 2.6 | MHCKE250 | 250 | 23.6 |
| 2.3 | 2.9 | 3.5 | MHCKE320 | 320 | 31.6 |
| 2.6 | 3.4 | 4.1 | MHCKE400 | 400 | 36.9 |
| 3.3 | 4.2 | 5.1 | MHCKE450 | 450 | 45.7 |
| 3.4 | 4.3 | 5.2 | MHCKE520 | 520 | 49.6 |
| 4.5 | 5.8 | 7.1 | MHCKE600 | 600 | 63.9 |
| 5.4 | 6.9 | 8.4 | MHCKE750 | 750 | 75.8 |
| 6.1 | 7.9 | 9.6 | MHCKE950 | 950 | 87.0 |
| 8.1 | 10.4 | 12.6 | MHCKE1100 | 1100 | 114.5 |
| 9.2 | 11.9 | 14.5 | MHCKE1300 | 1300 | 131.3 |
| 11.2 | 14.3 | 17.5 | MHCKE1700 | 1700 | 158.8 |
| 13.7 | 17.6 | 21.4 | MHCKE2000 | 2000 | 194.5 |
Accessories
| Product Code | Description |
| MHTBB06 | 6mm Insulated Tile Backer Board (600mm x 1200mm) |
| MHTBB10 | 10mm Insulated Tile Backer Board (600mm x 1200mm) |
| MH3500 | Touch Screen Thermostat (16A) |
| MH3500WIFI | WiFi Enabled Touch Screen Thermostat (16A) |
| MHSW | 25mm Fixing Screws and 25mm Washers ( Packs of 50 ) |
Technical Detail
- Approximate Installed Loading: - 150W/m²
- Cable diameter: – 3mm
- Operating voltage: 230V, 50Hz
- Twin conductor cable
- Cold tail Length: 3m
- Two extremely tough, durable insulation layers which minimise the risk of damage during installation and ensure prolonged cable life
- Approvals: IEC 60800